Italic, Part II - The minuscules

Because metal broad edge pens cannot be pushed, the strokes must differ from the accepted stroke order of the English alphabet. Strokes are often broken into two part to allow pulling of the pen. Strokes directions are indicated in the diagram below with red arrows, the red lines indicate where a stroke starts when there is ambiguity. The number of arrows correspond to the number of strokes.

The basic strokes of Italic are the straight curve and the rounded point. (This is full of Zen.) The straight curve starts at 45 degrees and flattens out toward the top. The rounded point is the other part of the straight curve which starts out at 45 degrees and goes down and up. The rounded point can also be written upside down as is in the letters b, p, h, m n and k.

For starters, ascenders and descenders both have the same height as the x height. Although this is often changed to suit the mood of each piece.

The slant (indicated by the dotted lines) should be consistent throughout the whole piece. For letters with straight portions the slant is easy to determine. For letters without straight lines running along the slant, the slant is the optical bisector of the letter (e.g. o, x, v ,w) or the bounding box of the letter (e.g. z, e, c, s). Although the proportions of the letters are not as strict as in Roman, Italic minuscules should occupy a parallelogram that has a width smaller than the height and that parallelogram should be of the same size throughout a piece.

Notice that q's should look like turned over b's and n's like upside down u's. Try to make them as similar to each other as possible. Consistency is more important than form. Two consecutive letters (e.g. those two t's in "letters") really do have to look the same to "make it work".

Italic, Part I - History

Before the invention of printing, manuscripts had to be copied by scribes. Italic was the result of lazy scribes but then replaced the unwieldy Uncial. The name results from the country which most books were written, and hence had the most book writing scribes, at the time. The word Italic should be pronounced "It-tal-lic" in honour of its origins and not "I-tal-lic" as it is sometimes heard. Italic is not a single kind of script. Any script that has a slant angle and is written with a broad edge pen can be considered Italic. This series will use the most clearly formed type of Italic, Chancery Italic, as an example to illustrate the basic construction of Italic letters.

A script to meet the needs
Italic was a result of the Renaissance. Before that, the only thing that needed to be written belonged to the church and there was no great rush to publish many copies. Hence booked were decorated (illuminated) with drawings and gilded. The speed at which the script could be written was of no great importance. It was probably during the renaissance that the word "sold out" was first related to books. Suddenly, being able to write fast was a useful skill. At that time, the official "book hand" (script used to write books) was Uncial, which was slow to write since it required multiple strokes for each letter. Scribes started seeking "short hand versions" of the letters which meant that they would write each letter with one stroke. Writing with quills, they were able to push their pens; something that modern calligraphers with crisp Italic nibs cannot, which explains why we need more than one stroke for most Italic letters nowadays. The writing slant was also a result of speeding up since the natural movement of the (right) hand is from bottom left to top right.

Evolution under constraints of the tool
The flag top (i.e. upward motion before verticals in letters d, b, p, h, m, etc.) and the ligature (i.e. the final upward stroke of the letters a, d, h ,m, n, etc.) was part a solution to a technical problem and a result of speedy writing. Quills don't always start on the first touch or they may put down too much ink at the first touch (which incidentally is sometimes a problem with dip pens too), the flag top allowed the ink flow to become consistent before writing the letter, it was also allowed the writer to have a second chance on the letter spacing - imagine starting straight down and finding that the letters were too close together. The ligature was most probably the result of lifting the pen too slowly when moving to the next letter. In Chancery Italic the letters are not linked, but Italic in which letters are linked (cursive Italic) do exist.